<dfn id="1egvm"></dfn>
  • <code id="1egvm"></code>
    <thead id="1egvm"></thead>
    <th id="1egvm"></th>
  • <del id="1egvm"></del><object id="1egvm"></object>
    1. <th id="1egvm"></th>
      <strike id="1egvm"></strike>
      <th id="1egvm"><video id="1egvm"><span id="1egvm"></span></video></th>
        <tr id="1egvm"></tr>

        <strike id="1egvm"></strike>
        <th id="1egvm"><video id="1egvm"></video></th>

        English | 添加收藏 | 設為首頁
        您所在的位置:網站首頁 > > 產品中心 > XLPE絕緣材料 > 低煙無鹵電纜料125℃光伏電纜用輻照低煙無鹵阻燃電纜料 FJUV125 FHUV125
        125℃光伏電纜用輻照低煙無鹵阻燃電纜料 FJUV125 FHUV125
        125℃Irradiation Cross-linkable Low-smoke Halogen-free Flame-retardant Compound for PV Cables ...
        型號:0

        參考價:¥

        說明:如您對該產品感興趣,請在此輸入您的手機號將本產品的地址 發送至您手機上。
        Description and Application 產品描述和用途
        FJUV125, FHUV125are irradiation cross-linkable low-smoke halogen-free flame-retardant insulation and jacketing compounds. They have good mechanical property, electrical property, flame retardant property and processability, especially for anti-ozone, anti-UV and high-temperature resistant properties. It is low smoke, halogen free, flame retardant, and especially suitable for the insulation and jacketing of solar PV cables which have strict aging property requirements. Those cables can pass TUV identification. They also can be used for other cables which have long service life requirements.
        FJUV125,FHUV125是輻照交聯型低煙無鹵阻燃絕緣料和護套料,其具有優良的物理機械性能,電性能,阻燃性能以及加工性能,更為突出的是其具有卓越的抗臭氧、抗紫外線,耐高溫等特性,產品低煙,無鹵,阻燃,特別適用于對老化條件要求較高的太陽能光伏電纜的絕緣,護套上,也可用于其它有較長使用壽命要求的電纜上,用該產品制成的光伏電纜可以過TUV認證。
         
        Processing Indicator 加工工藝
        Recommend to use special screw for low-smoke halogen-free compound with L/D=20-25.
        采用低煙無鹵專用螺桿,長徑比L/D=20-25。
        Model
        牌號
        Machine Barrel Temperature
        機筒溫度
        Molding Temprature
        機頭溫度
        FHUV125/ FJUV125 120-150℃ 150-165℃
         
        Physical and Electrical Properties 物理及電性能指標
        Item
        試驗項目
        Unit
        單位
        Specification
        技術要求
        FHUV125 FJUV125
        Density
        密度
        g/cm3 ≤1.45 ≤1.45
        Tensile Strength
        拉伸強度
        MPa ≥10 ≥10
        Elongation at Break
        斷裂伸長率
        % ≥180 ≥180
        Aging Conditions
        熱壽命試驗
        / 185℃×100h
        Reserved elongation at Break
        斷裂伸長率保留率
        % ≥50 ≥50
        Aging Conditions
        空氣熱老化條件
        / 150℃×168h 150℃×168h
        Reserved Tensile Strength
        拉伸強度保留率
        % ≥70 ≥70
        Reserved Elongation at Break
        斷裂伸長率保留率
        % ≥70 ≥70
        Dielectric Strength
        介電強度
        MV/m ≥20 ≥20
        Brittle Temperature With Low Temperature Impact 低溫沖擊脆化溫度 -40 -40
        20℃Volume Resistivity
        20℃體積電阻率
        Ω. m ≥1.0×1012 ≥1.0×1011
        Thermal Deformation
        熱變形(121℃×1h)
        % ≤40 ≤40
        Oxygen Index
        氧指數
        % ≥30 ≥30
        Hot Set Test Condition
        熱延伸實驗條件
        200℃×0.2MPa×15min
        Hot Elongation
        負荷下伸長率
        % ≤75 ≤75
        Set
        冷卻后永久形變
        % ≤15 ≤15
        Hot-wet Resistivity
        耐濕熱(濕度85%)
        ℃×h 90×1000 90×1000
        Tensile Strength Variation
        拉伸強度變化率
        % ±30 ±30
        Elongation Variation
        斷裂伸長率變化率
        % ±30 ±30
        Acid and alkali Resistivity
        耐酸堿(草酸、氫氧化鈉)
        ℃×h 23×168 23×168
        Tensile Strength Variation
        拉伸強度變化率
        % ±30 ±30
        Elongation at Break
        斷裂伸長率
        % ≥100 ≥100
        HCL Gas Evolution
        HCL氣體發生量
        Mg/g ≤1.0 ≤1.0
        PH Value
        PH值
        / ≥4.3 ≥4.3
        Smoke Density煙密度
        – No-flame Mode無焰模式
        –      – Flame Mode有焰模式
        Ds max  
        ≤200
        ≤100
         
        ≤200
        ≤100
        Conductivity
        電導率
        uS/mm ≤10 ≤10
        Toxicity Index
        毒性指數
        / ≤5.0 ≤5.0
         
        Suggested irradiation dose:10-15 mega-tera.  建議的輻照劑量為:10-15兆拉
         

        Attentions 注意事項:
        1)The compound should be dried before using if the package is broken. Once package is open, recommend to run out within 12 hours.
        原料破包需烘干后才能使用,材料一經開封,建議12小時之內用完。
        2)Please ensure the screw, barrel, hopper are thoroughly cleaned before operation. Avoid bringing impurities while processing.
        加工前確保螺桿、機筒、加料斗徹底清理干凈,加工過程中嚴禁帶入雜質。
        3)If you need a faster extrusion. Please accelerate screw speed gradually to avoid inadequate plasticizing which may cause rough surface of the cables.
        如果要快速擠出時,請慢慢逐漸加快螺桿轉速,以免塑化不良,電纜表面毛糙。
        最新综合精品亚洲网址_免费av一区二区三区3atv_免费可看黄的视频网站_免费看毛片

        <dfn id="1egvm"></dfn>
      1. <code id="1egvm"></code>
        <thead id="1egvm"></thead>
        <th id="1egvm"></th>
      2. <del id="1egvm"></del><object id="1egvm"></object>
        1. <th id="1egvm"></th>
          <strike id="1egvm"></strike>
          <th id="1egvm"><video id="1egvm"><span id="1egvm"></span></video></th>
            <tr id="1egvm"></tr>

            <strike id="1egvm"></strike>
            <th id="1egvm"><video id="1egvm"></video></th>