<dfn id="1egvm"></dfn>
  • <code id="1egvm"></code>
    <thead id="1egvm"></thead>
    <th id="1egvm"></th>
  • <del id="1egvm"></del><object id="1egvm"></object>
    1. <th id="1egvm"></th>
      <strike id="1egvm"></strike>
      <th id="1egvm"><video id="1egvm"><span id="1egvm"></span></video></th>
        <tr id="1egvm"></tr>

        <strike id="1egvm"></strike>
        <th id="1egvm"><video id="1egvm"></video></th>

        English | 添加收藏 | 設為首頁
        您所在的位置:網站首頁 > > 產品中心 > XLPE絕緣材料 > 低煙無鹵電纜料輻照交聯低煙無鹵阻燃聚烯烴護套料 FEHW90, FEHW105, FEHW125, FEHW150
        輻照交聯低煙無鹵阻燃聚烯烴護套料 FEHW90, FEHW105, FEHW125, FEHW150
        Irradiation Cross-linkable Low-smoke Halogen-free Flame-retardant Polyolefin Jacketing Compound ...
        型號:0

        參考價:¥

        說明:如您對該產品感興趣,請在此輸入您的手機號將本產品的地址 發送至您手機上。
        Description and Application 產品描述和用途
        FEHW90, FEHW105, FEHW125, FEHW150 are irradiation cross-linkable low-smoke halogen-free jacketing compounds, which don’t contain heavy metals like Pb, Ba, Cd, Cr, Sn and Sb. Their properties can well meet RoHS Standard. They have good physical and mechanical properties, especially good temperature-resistant performances. They are mainly used for the jacketing of communication cables, control cables and power cable.
        FEHW90,FEHW105,FEHW125,FEHW150是可輻照交聯低煙無鹵護套料。不含Pb、Ba、Cd、Cr、Sn、Sb六大重金屬。滿足RoHS標準要求。產品具有良好的物理機械性能,尤其是較好的耐溫性。主要用于通信電纜,控制電纜和電力電纜的護套層。
         
        Processing Indicator   加工工藝
        Recommend to use special screw for low-smoke halogen-free compound with L/D=20-25.
        采用低煙無鹵專用螺桿,長徑比L/D=20-25。
        Model
        牌號
        Machine Barrel Temperature
        機筒溫度
        Molding Temprature
        機頭溫度
        FEHW90/FEHW105/FEHW125/
        FEHW150
        130-140℃ 150-160℃
         
         
        Physical and Electrical Properties 物理及電性能指標
        Item
        試驗項目
        Unit
        單位
        Specification
        技術要求
        FEHW90 FEHW105 FEHW125 FEHW150
        Tensile Strength
        拉伸強度
        MPa ≥10 ≥10 ≥10 ≥10
        Elongation at Break
        斷裂伸長率
        % ≥150 ≥150 ≥150 ≥150
        Density
        密度
        g/cm3 ≤1.5 ≤1.5 ≤1.45 ≤1.45
        Dielectric Strength
        介電強度
        MV/m ≥20 ≥20 ≥20 ≥20
        Aging Conditions
        熱老化條件
        / 121℃×168h 136℃×168h 158℃×168h 180℃×168h
        Tensile Strength Variation
         After Aging
        老化后拉伸強度變化率
        % ≥75 ≥75 ≥75 ≥75
        Elongation Variation After Aging
        老化后斷裂伸長率變化率
        % ≥75 ≥75 ≥75 ≥75
        Brittle Temperature With Low Temperature Impact
        沖擊脆化溫度
        -40 -40 -40 -40
        Volume Resistivity at 20℃
        20℃體積電阻率
        Ω·m ≥1.0×1011 ≥1.0×1011 ≥1.0×1011 ≥1.0×1011
        Hot Set Test Condition
        熱延伸試驗條件
        200℃×0.2MPa×15min
        Hot Elongation
        負荷下伸長率
        % ≤100 ≤100 ≤100 ≤100
        Set
        冷卻后永久形變
        % ≤15 ≤15 ≤15 ≤15
        Water Absorption
        吸水性實驗
        14 days at 70℃
        mg/cm2 ≤5 ≤5 ≤5 ≤5
        Oxygen Index
        氧指數
        % ≥32 ≥32 ≥32 ≥28
        HCLGas Evolution
        HCL氣體發生量
        Mg/g ≤1.0 ≤1.0 ≤1.0 ≤1.0
        PH Value
        PH值
        / ≥4.3 ≥4.3 ≥4.3 ≥4.3
        Smoke Density煙密度
        – No-flame Mode無焰模式
        – Flame Mode有焰模式
        Ds max  
        ≤250
        ≤100
         
        ≤250
        ≤100
         
        ≤250
        ≤100
         
        ≤250
        ≤100
        Conductivity
        電導率
        uS/mm ≤10 ≤10 ≤10 ≤10
        Toxicity Index
        毒性
        / ≤5.0 ≤5.0 ≤5.0 ≤5.0
         
        Suggestedirradiation dose:12-15 mega-tera.建議的輻照劑量為:12-15兆拉。
         

        Attentions 注意事項:
        1)The compound should be dried before using if the package is broken. Once package is open, recommend to run out within 12 hours.
        原料破包需烘干后才能使用,材料一經開封,建議12小時之內用完。
        2)Please ensure the screw, barrel, hopper are thoroughly cleaned before operation. Avoid bringing impurities while processing.
        加工前確保螺桿、機筒、加料斗徹底清理干凈,加工過程中嚴禁帶入雜質。
        3)If you need a faster extrusion. Please accelerate screw speed gradually to avoid inadequate plasticizing which may cause rough surface of the cables.
        如果要快速擠出時,請慢慢逐漸加快螺桿轉速,以免塑化不良,電纜表面毛糙。
         
         
        最新综合精品亚洲网址_免费av一区二区三区3atv_免费可看黄的视频网站_免费看毛片

        <dfn id="1egvm"></dfn>
      1. <code id="1egvm"></code>
        <thead id="1egvm"></thead>
        <th id="1egvm"></th>
      2. <del id="1egvm"></del><object id="1egvm"></object>
        1. <th id="1egvm"></th>
          <strike id="1egvm"></strike>
          <th id="1egvm"><video id="1egvm"><span id="1egvm"></span></video></th>
            <tr id="1egvm"></tr>

            <strike id="1egvm"></strike>
            <th id="1egvm"><video id="1egvm"></video></th>